Sapphire Blade questions and answers

A sapphire blade is a recipient-site instrument made of sapphire crystal that opens the channels into which grafts are placed in Sapphire FUE hair transplantation. Its hardness lets the blade take and hold a smooth, fine edge, and its width is chosen to match the graft. The Garry Sapphire Blade is published in 7 widths from 1.1 to 1.7 mm.

The Garry Sapphire Blade is Garry Medical's recipient-site blade for the channel opening stage, with a sapphire crystal V-shaped tip designed for micro-channel creation. It comes in 7 widths from 1.1 to 1.7 mm in 0.1 mm steps, with 7 order codes from SF-110 to SF-170. Every blade is manufactured in Türkiye, inspected individually before it ships and supplied non-sterile in protective single-blade packaging. All widths are listed on the Sapphire Blade family page.

Sapphire FUE is FUE hair transplantation in which the recipient channels are opened with sapphire blades, such as the Garry Sapphire Blade, instead of steel blades. The extraction stage is unchanged, since grafts are still harvested with an FUE punch and placed the same way, so the name describes the incision stage only. It is an incision-stage specification rather than a new technique; see Sapphire FUE in the glossary.

The Garry Sapphire Blade belongs to the premade-incision workflow, where channels are opened first and grafts are placed afterwards with forceps or an implanter; in one-motion DHI, the implanter needle opens the channel at placement, so there is no separate blade stage. The blade choice and the placement method are independent decisions, and mixed protocols are common, with sapphire channels for the bulk of the plan and implanter pen placement in zones where the surgeon wants direct control. Garry makes both lines, the Sapphire Blade and the DHI Implanter Pen & Needle.

The Garry Sapphire Blade is designed, manufactured and inspected individually by Garry Medical in Türkiye. Material intake, machining of the blade profile, surface finishing, piece-by-piece inspection and packing are carried out at its own facility, and blades are supplied direct to clinics and distributors worldwide with no importer in between. The process is described on the Production page.

The Garry Sapphire Blade comes in 7 widths, 1.1, 1.2, 1.3, 1.4, 1.5, 1.6 and 1.7 mm, in 0.1 mm steps. Each width is its own catalog entry with its own order code and product page, for example the Garry Sapphire Blade 1.4 mm, order code SF-140.

The Garry Sapphire Blade has 7 order codes, one per width, from SF-110 to SF-170. The digits give the width, so SF-110 is 1.1 mm, SF-140 is 1.4 mm and SF-170 is 1.7 mm. Ordering by code means a reorder names the same width as the first delivery.

The Garry Sapphire Blade 1.1 mm, order code SF-110, is the width typically chosen for hairline zones and fine single-hair grafts, and it is the narrowest width in the range. The 1.2 mm blade, SF-120, is a narrow width for fine grafts and transition zones. The final choice follows the measured graft caliber and the surgeon's plan; see the 1.1 mm product page.

The Garry Sapphire Blade widths for multi-hair follicular units are 1.6 mm (SF-160), a wide width for multi-hair units, and 1.7 mm (SF-170), the widest option in the set, for the largest grafts. For fuller units a step below, 1.5 mm (SF-150) is the standard-to-wide width.

The Garry Sapphire Blade width is matched to graft caliber and the site plan, and a blade matched this way is designed to open a channel that fits the unit rather than a larger wound. Narrower widths go to single-hair grafts at the hairline and wider widths to multi-hair units in the mid-scalp. In the middle of the range, 1.3 mm (SF-130) is a narrow-to-standard width for everyday recipient work and 1.4 mm (SF-140) a standard width for mixed follicular units. Send your zone plan with a quote request and we suggest a starting set.

Most teams run 2 or 3 Garry Sapphire Blade widths per case, stepping through them across the zones of the scalp, for example a narrow width at the hairline and a wider one for multi-hair units behind it. Because each width has its own order code, a first order can be a short width ladder built from your graft calibers and zone plan.

No, the Garry Sapphire Blade is published in 7 widths from 1.1 to 1.7 mm in 0.1 mm steps, and widths outside that range or custom widths are not offered. The narrowest code is SF-110 (1.1 mm) and the widest is SF-170 (1.7 mm); all 7 are listed on the Sapphire Blade family page.

The Garry Sapphire Blade publishes its width, 1.1 to 1.7 mm, and its edge profile, a V-shaped tip for micro-channel creation; blade length, thickness, angle options, the mount format and the mount material are not published on the site. They are confirmed in writing on the quotation, together with the fit to the holder you use. Name your holder and protocol in a quote request.

The Garry Sapphire Blade is made of sapphire crystal, the material stated on every Garry Sapphire Blade product page. Sapphire crystal is the material of the blade's cutting tip, used because its hardness lets the edge take and hold a smooth, fine geometry. Further material questions are answered in writing on request through the contact page.

The Garry Sapphire Blade has a V-shaped tip designed for micro-channel creation, ground in sapphire crystal. A fine tip like this is designed to part tissue with minimal lateral displacement rather than pushing it aside, which is why sapphire tips are associated with dense-packing plans. Width is the published dimension, 1.1 to 1.7 mm, with one order code per width.

The Garry Sapphire Blade has a V-shaped tip, the edge profile Garry publishes for micro-channel creation, while a U-shaped tip is a rounded profile that some blades carry; the choice between profiles follows the surgeon's preference and technique. Garry does not publish a U-shaped version, so every Garry Sapphire Blade has the V-shaped tip, in 7 widths from 1.1 to 1.7 mm.

The Garry Sapphire Blade is made from sapphire crystal, the material Garry uses for its channel-opening blades, with a V-shaped tip intended for small, clean recipient channels. How sapphire and steel compare as material classes is explained in the sapphire vs steel guide. How an edge behaves over a session also depends on edge angle, load and the surgeon's technique, as the glossary explains.

Yes, the Garry Sapphire Blade is hard but brittle. Sapphire crystal holds its edge under normal cutting loads but can chip if it is dropped, pried sideways or knocked against a metal tray. Handle the blade by the mount only, keep the edge away from metal instruments and hard trays, and replace a blade once the edge shows any damage.

Yes, the Garry Sapphire Blade is used in a blade holder, the handle a blade mounts into, which controls exposed depth and grip. The holder should be secure and well matched to the blade, so the brittle edge is protected and the surgeon keeps control; a loose or ill-fitting holder is a risk to the tip.

Holder fit for the Garry Sapphire Blade is confirmed on the quotation, because it depends on your configuration. Tell us the holder you use in your quote request and we confirm the fit in writing before you order. Every Garry Sapphire Blade product page lists its mounting as holder compatibility confirmed on quotation.

The Garry Sapphire Blade range does not include blade holders; Garry's published families are the Fue Punch, Long Hair Fue Punch, Sapphire Blade, DHI Implanter Pen & Needle and the Garry Smart Fue System. The blade is supplied non-sterile in protective single-blade packaging, and its fit to the holder your clinic uses is confirmed in writing on the quotation.

With the Garry Sapphire Blade, channel depth is set by the holder, which controls how much of the blade is exposed, on the same principle as with a steel blade. Blade width is matched to graft caliber, the holder sets the exposed depth, and the channel map is made before the first graft is placed; the depth itself is part of the surgeon's plan.

Yes, grafts can be placed into channels opened with the Garry Sapphire Blade, either with placement forceps or with a dull-tipped implanter, in the 2-stage premade-incision protocol. Sharp implanter needles, as used in one-motion DHI, open their own channel as they place, so that workflow has no separate blade stage. Garry's implanter line is the DHI Implanter Pen & Needle family.

Lateral (coronal) incisions sit perpendicular to the direction of hair growth and help control the exit angle, while sagittal incisions run parallel to it, and both can be made with a sapphire blade such as the Garry Sapphire Blade. Blade width choice follows the orientation, so teams pick their widths from SF-110 to SF-170 for the incision pattern and graft calibers in the plan. The terms are defined in the glossary.

Switching from steel blades to the Garry Sapphire Blade calls for no new incision technique, since the incision gesture is the same and depth stays holder-controlled; teams typically adapt within a few sessions. The real adjustments are organizational, such as tray layout, a brief magnified tip check before each session and width planning.

Yes, the Garry Sapphire Blade can run alongside steel blades in the same case, and zone-by-zone mixing is a common configuration, for example sapphire for the hairline and steel for the mid-scalp bulk, chosen per plan. Holders make switching straightforward.

No, the Garry Sapphire Blade is supplied non-sterile, in protective single-blade packaging, and it is steam sterilized at 134 °C before use. Sterilize it with the edge protected from contact with metal or hard surfaces.

The Garry Sapphire Blade is sterilized in a steam autoclave at 134 °C, with the edge protected from contact with metal or hard surfaces and the blade handled by the mount only. A protective case or a dedicated tray keeps the edge away from other instruments during the cycle and in transport. If your sterilizer setup needs a detail the product page does not cover, ask us and we answer in writing.

The Garry Sapphire Blade is reusable and is designed for a total of up to 30,000 channel openings. Between uses it is cleaned and steam-sterilized at 134 °C under your facility's protocol, with the edge protected from metal and hard surfaces. A blade whose edge shows any chip or damage is replaced, whatever the number of channels it has opened.

The Garry Sapphire Blade is cleaned by flow and immersion rather than by wiping, held by the mount, with the edge kept away from metal instruments and hard trays. Rinse it promptly at the point of use, clean it with a neutral-pH detergent, rinse, dry and steam sterilize. Whether a specific method such as ultrasonic cleaning suits your configuration is answered in writing on request.

The Garry Sapphire Blade is handled by the mount only, with the edge kept away from metal instruments and hard trays. It travels in a fixation tray or on top of the set, not loose under heavier handles, and stays protected during cleaning, sterilization and storage. These habits should be settled before the first case, since sapphire can chip on impact against metal.

Give the Garry Sapphire Blade a brief magnified tip inspection before each session, and check the edge on delivery as part of receiving the order. The blade is designed for a total of up to 30,000 channel openings, and a blade whose edge shows any damage is replaced rather than used, whatever its count. Garry does not re-sharpen or refurbish blades.

The Garry Sapphire Blade is supplied non-sterile, each blade in protective single-blade packaging and 10 blades per box. Each released blade carries its width's order code, SF-110 to SF-170, and instruments are packed individually before dispatch.

Lead time for the Garry Sapphire Blade is confirmed per order code on the quotation, and the order confirmation states the estimated dispatch date. It depends on the widths and quantities you order.

Garry supplies the Garry Sapphire Blade to clinics, hospitals and distributors worldwide, shipping as tracked freight direct from its facility in Türkiye with no importer in between. Shipping terms to your country are confirmed on the quotation, and where an exclusive dealer is appointed in a market, orders may run through that dealer.

If a Garry Sapphire Blade arrives damaged, wrong or short, notify Garry in writing with the order reference, the order codes concerned and photographs, within the periods set out in the Returns & Service Policy. Inspect every delivery on receipt and note visible transport damage on the carrier's delivery document before signing it. No blade may be sent back without a Return Authorization issued in writing in advance.

The Garry Sapphire Blade is priced by quotation, and prices are not published on the public site because the number depends on the widths, the volume and the destination. Request a quote with the order codes and quantities you need and you receive a written quotation within 24 hours on business days, with every width listed by its order code. Each product page also offers a Get a Price Quote dialog and a WhatsApp option.

Sapphire blades, the Garry Sapphire Blade included, cost more per blade than steel blades, which remain the economical standard, so the useful comparison is the cost of the incision stage per case at your session profile. The Garry Sapphire Blade is reusable and designed for a total of up to 30,000 channel openings, which changes how many blades a case consumes and how often the team changes instruments mid-case. Whether that favours sapphire depends on your volumes, session lengths and reprocessing discipline; the Sapphire FUE vs standard FUE guide works through the arithmetic.

The minimum order quantity for the Garry Sapphire Blade is confirmed on the quotation, together with lead time and shipping. Request a quote with the widths and quantities you need, mixing any of the 7 order codes in one request, and we reply within 24 hours on business days.

A first Garry Sapphire Blade order is usually a short width ladder chosen from your graft calibers and zone plan, with the blade format confirmed against your holders. A small first order across the widths you are considering can be priced through a quote request, so your surgeons can compare it with their current blades in comparable sessions before you standardize. Send your zone plan, session profile and holder through the contact page.

Yes, the Garry Sapphire Blade is supplied direct from the manufacturer to clinics and distributors worldwide, with volume terms by quotation. Distributors can apply for a dealer account on the dealer application page; our team reviews applications within 1-2 business days, and approved partners get distributor pricing across the catalog, online ordering, invoices, order history and quick reordering.

Neither the Garry Sapphire Blade nor a steel blade is better in every case, since both open recipient channels and the difference is the material. Steel is the economical, robust standard, with lower cost per case and variable widths through cut-to-width holders, while sapphire is chosen by teams that want an edge designed to stay consistent across long or dense sessions and can commit to careful handling. Many clinics stock both and let the surgeon decide per case; the trade-offs are set out in our sapphire vs steel guide.

Sapphire FUE and standard FUE differ at one stage only, the incision blade, which is sapphire crystal, as in the Garry Sapphire Blade, instead of hardened steel. Extraction with FUE punches, graft placement and the surgical plan stay the same, and depth is set by the holder in both. What changes is edge behaviour over a session, a finer tapered tip, blade cost per case and the handling risk, chipping for sapphire against dulling for steel; see Sapphire FUE vs standard FUE.

The Garry Sapphire Blade is Garry's recipient-site blade, and Garry's published range includes no diamond blades; the blade family is sapphire crystal in 7 widths from 1.1 to 1.7 mm. Whatever the material, a recipient blade is judged on edge behaviour over a session, cost per case, handling and holder fit, the same criteria our sapphire vs steel guide applies. Questions on how the Garry Sapphire Blade suits your protocol are answered in writing through the contact page.

The Garry Sapphire Blade is an incision instrument, and Garry makes no claim about healing, growth or scarring for it, because those outcomes belong to planning, technique and patient factors rather than to the instrument. What sapphire brings to the incision stage is edge consistency and a fine tip geometry, at a higher blade cost and with a stricter handling discipline. Whether that trade suits your clinic depends on your case mix, volumes and zones.

The Garry Sapphire Blade is a recipient-site blade with a V-shaped sapphire crystal tip, while "slit blade" is the industry term for a steel recipient-site blade, often trimmed to width in a cut-to-width holder. Both open recipient channels, and sapphire tips in general are ground into slit or spear geometries. The glossary defines both terms.

A fair way to compare the Garry Sapphire Blade with any other sapphire blade is on checkable facts, such as who makes it and where, whether every blade is inspected or only sampled, whether you buy direct, whether each width has its own order code, and whether material, tip, packaging, holder fit and warranty are stated. Garry publishes each of these, as the blade is manufactured in Türkiye and supplied direct, every blade is inspected individually, the 7 widths carry 7 order codes, the material is sapphire crystal with a V-shaped tip, packaging is protective and single-blade, holder fit is confirmed in writing and a manufacturer warranty covers defects in material and workmanship. Our procurement guide turns this into a checklist.

The Garry Sapphire Blade gives clinics and distributors facts they can check. It is made by Garry Medical in Türkiye and supplied direct, every blade is inspected individually before shipment, and each of its 7 widths from 1.1 to 1.7 mm has its own order code, so reorders match the first delivery. The material (sapphire crystal) and the protective single-blade packaging are stated on every product page and the V-shaped tip on the Sapphire Blade family page, holder fit is confirmed in writing before you order, quotations arrive in writing within 24 hours on business days, and distributors and high-volume clinics can open an account with partner pricing and online reordering.

Garry Medical is the manufacturer of the Garry Sapphire Blade, not a reseller. It designs and makes its own instruments in Türkiye, from material intake with sapphire crystal for the blades to machining of the blade profile, surface finishing, piece-by-piece inspection and packing, and supplies clinics and dealers direct with no importer in between.