Production
Manufacturing and Quality Control
Explore the manufacturing, material selection and quality control processes behind our hair transplant instruments.
The Garry Medical Production Process
From material selection and machining to finishing, inspection, and packaging, our core instruments are manufactured and quality-controlled in Türkiye.
Our production process is structured to maintain consistency across each stage. Every instrument follows a defined specification from material intake to final packaging, and quality checks are applied at each step rather than only at the end. Each published size carries its own order code and refers to one defined specification, so a reorder is made to the same drawing as the first delivery.
- In-House Manufacturing
- Core manufacturing, finishing, and inspection are carried out at our facility in Türkiye.
- Selected Materials
- Garry J-Steel is used for punches and implanter needles, sapphire crystal for blades, and medical-grade steel for implanter pens.
- Individual Quality Control
- Each instrument is individually checked for dimensions, surface finish, and function before shipment.
- Consistent Specifications
- Product sizes and specifications are clearly defined to support accurate ordering and repeat orders.
- 01
Material intake
Bar stock enters the line with its material confirmed for the order: Japanese Steel (Garry J-Steel) for the punches and implanter needles, sapphire crystal for the blades.
Checked · Material and stock dimensions
- 02
Precision machining
Punch geometries, needle profiles and blade profiles are machined to their drawings. Each published size has its own drawing and its own order code.
Checked · Geometry against the drawing
- 03
Surface finishing
After machining, the surfaces of each instrument are refined in stages and cleaned, so a smooth, consistent finish reaches the inspection bench.
Checked · Surface finish and cleanliness
- 04
Piece-by-piece inspection
Each instrument is inspected on its own for geometry, surface finish, function and size. A piece that fails any of these checks is not released.
Checked · Geometry, finish, function, size
- 05
Size and order code
Each released instrument is matched to the catalog size it was made to and carries that size's order code.
Checked · Size and order code match
- 06
Packing and dispatch
Instruments are packed individually and dispatched from the facility directly to the clinic or distributor.
Checked · Order contents against the quotation
Production range
What we produce, size by size
The full published range, family by family. Each size has its own catalog entry.
Fue Punch
Ø 0.7 - 0.9 mm · Superior Precision
5 diameters across 5 working lengths, crafted from Japanese Steel (Garry J-Steel).
Diameter, mm
- 0.7
- 0.75
- 0.8
- 0.85
- 0.9
Working length, mm
- 2.5
- 3.0
- 3.5
- 4.0
- 5.0
Long Hair Fue Punch
Ø 0.8 - 0.9 mm · no-shave extraction
3 diameters with a 4.0 mm working length for no-shave extraction, crafted from Japanese Steel (Garry J-Steel).
Diameter, mm
- 0.8
- 0.85
- 0.9
Sapphire Blade
1.1 - 1.7 mm · Refined Channels
Sapphire crystal edges for recipient-site incisions, in 7 widths.
Blade width, mm
- 1.1
- 1.2
- 1.3
- 1.4
- 1.5
- 1.6
- 1.7
DHI Implanter Pen & Needle
Ø 0.7 - 1.1 mm · Precise Graft Placement
DHI Implanter Pen and compatible DHI Needle, matched by diameter, each size in its own colour.
Needle diameter, mm
- 0.7
- 0.8
- 0.9
- 1.0
- 1.1
Garry Smart Fue System
Smart Control for Every Procedure
Our hair transplant machine, designed around the FUE workflow and made in Türkiye.
In its final stage of development. The countdown to launch has begun.
See also the DHI Implanter Needle page and Quality & Compliance.